B6
Usage: Designed for catch basins, storm sewers, lift stations and treatment plants in municipal and industrial applications.

B6 Benefits

(Reduced cost combination unit on single axle chassis. Increased maneuverability.)

B5 (5 CU. YDS.)
Usage: Large townships, small cities, water and sewer districts, sewer cleaning contractors.

B5 Benefits
Reduced cost with single-axle chassis mounting. Short turning radius for narrow streets. Meets needs when 10-yard debris body capacity is excessive but larger water capacity is required..

B10 (10 CU. YDS.)
Usage: Any size municipality, water and sewer district, or contractor cleaning storm drains, catch basins and combination sewers. Excellent for sanitary and storm sewer cleaning, water leak repair and emergency evacuation, and sewer line bypass for sewer repair/relining/replacement work.

B10 Benefits
Large debris body capacity (10 cubic yards). Tandem axle chassis for maximum payload capacity. Short wheelbase for good maneuverability.

B52 (5 CU. YDS.)
Usage: Designed for catch basins, storm sewers, lift stations and treatment plants in municipal and industrial applications.

B52 Benefits
Increased water capacity of 2000 gallons in a standard length unit. Debris collection of 5 cubic yards.

CB 10/15 (10/15 CU. YDS.)
Usage: When jetting hose is not required. For catch basin cleaning and vacuuming of semi-dry material.

CB10/15 Benefits
Cost-effective, one-man catch basin cleaning.

B15 (15 CU. YDS.)
Usage: Excellent for large diameter sanitary and storm sewer cleaning, interstate highway large catch basin cleaning, digester and other treatment plant maintenance.

B15 Benefits
Larger debris and water tank capacities for less trips to the dump site. Longer on-site cleaning time with reduced water tank fill-up. Suitable for long distance dump site locations.

• SINGLE ENGINE DRIVE
  Dramatically decreases fuel consumption, maintenance expenses, sound levels, weight on chassis and initial purchase price. Chassis engine powers all systems.
• REAR MOUNTED HOSE REEL
  The 180° articulating rear reel facilitates placement of unit regardless of manhole location. The rear location assures unobstructed vision for the driver, allows maximum air flow to the chassis engine and provides the quietest workstation in the industry.
• FULL POWER. 360° ROTATING BOOM
  The top loading boom is self-cleaning, powers up/down and extends to 20 feet. Top mounting produces even load distribution.
• VACUUM HOSE
  The heavy-duty, wire-reinforced rubber, 8" hose is designed to prevent wear and clogging. Vacuums up bottles, cans and bricks over 150 feet in depth.
• CYLINDRICAL DEBRIS TANK
  High-strength steel is corrosion and abrasion-resistant. Has more usable space for larger loads than any other design. Capacities of 5 to 15 cubic yards.

• LIGHTWEIGHT WATER TANKS
  Fully baffled 3/8" thick, U.V. stabilized, non-corrosive polyethylene saddle tanks. Capacities from 1000 to 1500 gallons.
• TRIPLEX RECIPROCATING WATER PUMP
  Continuous flow triplex reciprocating water pump is rated up to 80 GPM@2500 psi and is designed to operate dry.
• INTERNAL BOOM VALVE
  Increases air velocity, builds instantaneous vacuum to 204" of negative water pressure for picking up materials above and below water.
• VACUUM CUT-OFF SYSTEM
  Fail safe protection prevents materials from entering positive displacement exhauster and passing into the atmosphere.
• LOWEST CENTER OF GRAVITY
  Makes full loads more stable during transport.
• PNEUMATIC FOOD CONTROL
  Permits one-man operation of hose reel payout/retrieve, and allows operator to work any distance from unit.
• VACUUM TUBES
  Ball and socket connections and quick-acting lever locks form a water-tight seal. Tubes can be locked at various angles to allow infinite positioning of tubes when cleaning deep manholes and catch basins.

AIR/VAC SYSTEM
Positive displacement exhauster
2700 CFM (4588m³/h) operating capacity, 204" (5282 mm) water column
Poly chain drive
Muffler Silencer
Protected by micro-filter/centrifugal separator
Vacuum relief valves

DEBRIS TANK
Cylindrical design
10 cu. yd. (7.6m³) B10
15 cu. yd. (11.5 m³) B15
Dumping 45°
Hydraulic power up/down cylinder
Self-aligning closure seal
Top-hinged full opening rear door
Two 5" (127 mm) liquid level sight eyes
Debris deflector plate
Double strainer for rear door drain
Rear door security prop
4 mechanical rear door locks
Rear door power up/down hydraulic cylinder
Stainless steel ball check valve
6" (152 mm) quick opening rear drain valve
6" (152 mm) x 15" (4.6 m) lay flat discharge

BOOM
Top mounted
360° hydraulic rotation
Portable pendant, controls all functions
Internal boom valve
8" (203 mm) extra heavy duty rubber intake hose
Extends to 20' (6.1 m)
Powers up/down
Rear storage location
Quick open cleanout

WATER SYSTEM
Triplex reciprocating
80 GPM (303 liters)
2000 PSI (138 bar)
Poly chain drive
Pressure relief valve
Water flow control valve
Air valve on pump for cold weather operation
Wash down gun connection
Wash down gun with 35' (10.7 m) of 1/2" (12.7 mm) hose
800 PSI (55 bar) relief valve
Suction Strainer

WATER TANK
B10 1000 gal. (3785 liters)
B15 1500 gal. (5677 liters)
Saddles tanks independent of debris tank
Material: U.V. stabilized 3/8" (9.5 mm) thick
Fully baffled
Anti-siphon air gap protection
Curb side fill
2 liquid level indicators
Removable inspection covers
Limited lifetime warranty

HOSE REEL
Rear mounted
Hydraulic 180° articulating
400' (122 m) of 1" (25.4 mm), 2500 PSI (172 bar) hose
800' of 1" (248 m) hose capacity
Reel speed control valve
Hose levelwind
Hydraulic drive
Pneumatic food control pedals
Automatic positioning lock
Engine throttle
Vacuum/pressure gauge
Tachometer
Water pressure gauge

POWER TAKE-OFF
Split shaft transfer case
Pneumatic shifting

ACCESSORIES, STANDARD
Hinged tank support prop
8" x 8' (203 mm x 2.4 m) aluminum extension tube
8" x 6' (203 mm x 1.8 m) aluminum intake tube
Two operation, parts and service manuals (unit only)
15° nozzle
35° nozzle
Manhole hose guide
Painted one color, acrylic urethane
Touch-up paint
2 aluminum tool boxes
Tube storage carriers on front bumper
Aluminum fenders
Mud flaps

VACUUM/DEBRIS TANK OPTIONS
Hydraulic rear door locks
Water pump-off system
Internal flush-out system
Exhausters up to 5250 CFM
Telescoping boom to 25' (7.6 m)
Waste-water recycling
Fluidizer for underwater suction
Stainless steel tank
Tank vibrator

WATER SYSTEM OPTIONS
Cold weather recirculation
Rubber leader hose
35-160 GPM (132-605 liters) water pumps
Pressure: 0-3000 psi (207 bar)
1/2" (12.7 mm) hose reel
Pulsation dampener
Increased water capacity

OTHER OPTIONS
Front mounted hose reel
Power tilt for front mounted hose reel
Front mounted extending 320° rotating hose reel
Counter for levelwind
Street flushers
Debris and water tank interconnect
Deluxe tube storage racks
Power deck shroud and skirting
Body arrow light board

For other options, see Aquatech's accessory catalog.
Specifications are subject to change without notice.
Some photographs may show optional equipment.
All ratings are calculated at sea level.
Patents applied for.