CB-15
CATCH BASIN CLEANER
CATCH BASIN CLEANER
  CB-15 Usage: The CB-15 is for contractors, municipalities, and industrial site use where a jetting hose is not required. Ideal for catch basin cleaning and vacuuming of semi-dry material. CB-15 Benefits Cost-effective, one-man catch basin cleaning. |
|
 |
||||
| FEATURES | ||||
| Air/Vac System: Positive displacement exhauster. Operating capacity of 2700 CFM (4587.3M3) and a 204" (5181.6mm) water column. Includes a PolyChain belt drive, muffler silencer with clean out and two vacuum relief valves. Is protected by filter/centrifugal separator. Boom Assembly : Top mounted boom assembly with 360º motorized boom rotation. Internal air vac valve includes an 8" (203.2mm) extra heavy duty rubber intake hose. 4-1/2' (1.4M) boom can extend to a minimum of 19' (5.8M). Powers up/down. Rear storage location. Includes portable pendant control with a 35' (10.7M) cable. Clean out port. |
Hydraulic Dumping: Single lever control. Can dump at a 45º angle Includes a heavy-duty double acting cylinder and a self-aligning closure seal. Debris Tank: Volumetric capacity of 10 cu.yd. Hydraulic dumping with top hinged full hydraulic opening rear door. Includes two 5" (172mm) liquid level sight eyes, a steel deflector plate, a double wall strainer on the rear door drain, four mechanical rear door locks, a 10" (254mm) diameter stainless steel ball check valve, and a 6" (152.4mm) quick opening rear drain valve with 15' (4.6M) lay flat hose. Cylindrical in design, made of 1/4" (6.4mm) A36 steel. |
Triplex Reciprocating Water Pump: 0-35 GPM capacity and 0-2000 PSI rating. Water Tanks: Two saddle tanks with a 500 gallon capacity. 3/8" stress reinforced polyethylene and ribbed reinforced with air gap protection. Two liquid level indicators. Power Take Off (PTO): Split shaft assembly and pneumatic shifting. |
||
|
||||
 Click here to see how you can customize your Aquatech truck to meet your specific requirements. |
||||
