SJ-1650 Series
TRUCK MOUNTED SEWER JET©

The SJ-1650 Sewer Jet is economically designed for removing sand, stones, bottles, cans, grease, sludge and other debris from sanitary and storm sewer lines

STATE-OF-THE-ART FEATURES

• SINGLE ENGINE DRIVE
  Decreases fuel consumption, maintenance expenses, sound levels, weight on chassis and initial purchase price. Chassis engine powers all systems.
• DRIVE OPTIONS
  PolyChain with adjustable belt drive, Hydrostatic drive or Dual engine drive available. Integral split shaft power take off (PTO). Transmission PTO for hydraulic system.
• REAR MOUNTED HOSE REEL PivArt™ Optional
  The dual action of the rear reel articulates 110° and pivots 180°. This facilitates placement of unit regardless of manhole location, giving the operator a cleaning path of 270°. The rear location assures unobstructed vision for the driver, allows maximum air flow to the chassis engine and provides the quietest workstation in the industry.

• WATER TANKS
  Three modular disign 3/8" UV stabilized polyethylene tanks, store 550 gallons each, providing a usable capacity of 1,650 gallons. These tanks are extremely durable and they never rust or corrode.
• TRIPLEX RECIPROCATING WATER PUMP
  0 - 80 GPM, continuous flow triplex reciprocating water pump is rated at 0 - 2500 PSI and is designed to operate dry.

180° Articulation and 180• pivoting

Consult factory for specifications and chassis requirements. Dimensions may vary with chassis selection. For cab over chassis please contact our Engineering Department. Cab over chassis may create large space behind cab.

WATER TANK
Modular design
1650 gal (6245 lit) usable capacity
3/8" (9.52 mm) UV stabilized polyethylene
Low profile and narrow design
Full length sediment chamber
Full length anti-splash compartment
Water fill with 2-1/2" NSFT connector
Anti-Siphon/air gap fill system design
Water level sight tube indicators

POWER TAKE-OFF DRIVE
Integral split shaft power take off
Heavy duty jack shaft assembly
PolyChain adjustable belt drive
Transmission PTO for hydraulic system
Live output for cold weather recirculation

WATER SYSTEM
Triplex reciprocating
80 GPM (246 lit/min)
0 - 2500 PSI (0 - 72 bar) rating
Capable of running dry
External gear reduction box
Elevated mounting for max. ground clearance
Suction line strainer
"Y" type polyethylene filter
Pressure relief valve
Air purge valve
Blow-out valve for cold storage
Wash down gun connection with 800 PSI (55 bar) relief valve

CONTROLS AND GAUGES
Cab switches for PTO controls
Engine throttle control
Tachometer
Water flow control valve
Water pressure gauge
Water level sight tube indicators
Hose reel payout/retrieve controls
Hose speed control
Hose reel articualting control

HOSE REEL
Rear mounted
180° hydraulic pivoting
Automatic positioning lock
5-1/2" (1.6 m) working radius
800' (244 m) capacity of 1" (25.4 mm) hose
Hose, 1" (25.4 mm) x 2500 PSI (172 bar)
400' (122 m) of 1" (25.4 mm) standard
Heavy duty payout/retrieve chain drive

STORAGE
Tool box, 14" x 36" x 29" (356 mm x 914 mm x 737 mm)
Tool trays at either side of unit

ACCESSORIES
15° nozzle
35° nozzle
Hose levelwind
Lower hose guide with rope
Adjustable hand gun with 25' (7.62 m) of hose
Operation, Parts and Service Manual
Touch up paint

HOSE REEL-PivArt™ patent pending optional
110° hydraulic articulation (Optional)

OPTIONS
0-80 GPM (0-303 lit/min) water system
0-2500 PSI (0 - 175 bar) water system
PTO direct drive
Hydrostatic drive
2 engine drive
Stainless steel tool trays

Refer to your Aquatech Accessory Manual for complete selection.

Specifications are subject to change without notice.

Some photographs may show equipment that is optional.

All ratings are calculated at sea level.

Patents applied for.